Hotplate Accessories
Chemglass Life Sciences PIE-BLOCK System, Supplied with 1ea Safety Holder and 1ea of the Six (6) Listed Pie Wedges
PIE-BLOCK System, Supplied with 1ea Safety Holder and 1ea of the Six (6) Listed Pie Wedges. Aluminum construction provides excellent heat transfer while not interfering with the magnetic fieldHoles are spaced for optimum stirring of all vesselsHolder fits all 135mm diameter hotplate stirrersInserts are color coded for quick & easy identificationThermowell is provided for insertion of a contact thermometer or temperature sensorReaction PIE-BLOCK is designed to fit directly on 135mm diameter circular top hot plate stirrers. Versatile design of the safety pie plate holder allows up to four pie wedges on one hot plate & securely locks them together. All wedges are anodized aluminum & color-coded for quick & easy identification. A drilled thermowell is provided for insertion of contact thermometers or temperature sensors.Complete PIE-BLOCK System (CG-1991-P-01) Consists of 1 Each: CG-1991-P-05, CG-1991-P-10, CG-1991-P-11, CG-1991-P-12, CG-1991-P-13, CG-1991-P-14 and CG-1991-P-15
Chemglass Life Sciences Reaction Block, 1 Dram (4mL) Vial, 15mm x 45mm, Gold, 48 Position, 19mm Hole Depth
Reaction Block, 1 Dram (4mL) Vial, 15mm x 45mm, Gold, 48 Position, 19mm Hole Depth.Excellent heat transferWon't interfere with magnetic stirringHoles spaced for optimum stirring of all vialsColor-anodized for durability and easy identificationRound reaction blocks are designed to fit directly on 135mm diameter, round top hot plate stirrers. Aluminum construction offers excellent heat transfer without interfering with magnetic stirring. All blocks are anodized for increased strength, durability and chemical resistance. A thermowell is provided for insertion of a temperature sensor or contact thermometer. Available for scintillation vials and dram vials.
Chemglass Life Sciences Reaction Block, 20mL Scintillation Vial, 28mm x 60mm, Black, 17 Position, 24mm Hole Depth
Reaction Block, 20mL Scintillation Vial, 28mm x 60mm, Black, 17 Position, 24mm Hole Depth. Excellent heat transferWon't interfere with magnetic stirringHoles spaced for optimum stirring of all vialsColor-anodized for durability and easy identificationRound reaction blocks are designed to fit directly on 135mm diameter, round top hot plate stirrers. Aluminum construction offers excellent heat transfer without interfering with magnetic stirring. All blocks are anodized for increased strength, durability and chemical resistance. A thermowell is provided for insertion of a temperature sensor or contact thermometer. Available for scintillation vials and dram vials.
Cole-Parmer Thermo Scientific CIC0001448 External Temperature Probe, Stainless Steel, PT1000, 0-400°C
Choose from a wide range of replacement parts and accessories suitable for use with the Thermo Scientific™ Cimarec+™ and Super-Nuova+™ stirrers, hotplates, or hotplate stirrers. Choose accessories compatible with your equipment.
Biotang Inc PT1000 Temperature sensor for digital hotplate stirrers.
PT1000 Temperature sensor for digital hotplate stirrers.
Electron Microscopy Sciences Cross Sectional Holder
Made from non-magnetic stainless steel with 3.1 mm (1/8") diameter pin and adjustable angle turn-screw. Just insert specimens edge-on and observe the cross section directly.
Chemglass Life Sciences Protective Silicone Cover for AREX 6 (CG-1996-V10 & CG-1997-V-10) Hotplates
Protective Silicone Cover for AREX 6 (CG-1996-V10 & CG-1997-V-10) Hotplates. For use with CG-1996-V and CG-1997-V hotplates.
Research Products International Corp OHAUS Temperature Probe 20 cm PTFE
OHAUS Temperature Probe 20 cm PTFE
Chemglass Life Sciences Digital Thermoregulator ONLY, with Built In Timer
Digital Thermoregulator ONLY, with Built In Timer. Digital thermoregulator is equipped with innovative Fuzzy Logic technology that provides accurate set point +/- 0.5 C. Digital count down timer shuts off heating- adjustable from 0 to 24:59 (h:min). Innovative design incorporated a clamp for mounting on the vertical support rod.
Essendant TOWELBRAWNY ALL PURP
High-capacity all-purpose DRC (double recrepe) fabric is soft absorbent and durable Act as a rag replacer that is ideal for maintenance areas and works on grease grime water and oil Handy roll format uses less waste than bundles and bulk packs Designed to perform in automated touchless wiper dispensing system Towel/Wipe Type- Shop Towels Applicable Material- Multiple Material(s)- Double Recrepe Color(s)- Orange
Cole-Parmer ETS-D5 Programmable Temperature Probe
IKA 3378000 ETS-D5 Programmable Temperature Probe, Sensor features optimized PID control with three modes of operation — ensuring perfect temperature control without overshooting the set temperature, even in the case of quick heating. Mode A is suitable for work with varying parameters and is safety temperature adjustable; Mode B is suitable for series operation under uniform conditions; Mode C is suitable for unsupervised operation.
Glass Expansion Guardian Probe for SPS3/SPS4/AIMS
Guardian Probe for SPS3/SPS4/AIMS, probe only. Compatible with Aim Lab & Agilent SPS3/SPS4 Autosamplers. Requires a UniFit sample capillary available in IDs of 0.3mm, Black (P/N 70-803-1853), 0.5mm, Blue (P/N 70-803-1852), 0.75mm, Red (P/N 70-803-1714) or 1.0mm, Green (P/N 70-803-1721). The unique, robust tip design eliminates crushed and damaged tips due to misalignment. Drip-resistance prevents cross contamination of samples during probe movement, especially with oils. Built-in particle filtering holds back particulates from blocking the line. Completely inert design, all PEEK and PTFE construction, the Guardian autosampler probe provides exceptional resistance to strong acids and solvents.Replacement Mount Nut, P/N 70-803-1776. Guardian Probe for Teledyne Cetac autosamplers, see P/N 70-803-1803.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-900
Cole-Parmer Pt1000 Stuart Temperature Accessories Kit
Suitable for use with your Cole-Parmer Stuart Round-Top Hot Plates and Stirring Hot Plates